Power Tools

- High quality mechanics kit including heavy duty professional 9 drawer chest & 6 drawer trolley

- Constructed from a heavy duty all steel construction with a tough industrial powder coating

- Comprehensive range of sockets, spanners, wrenches, screwdrivers, pliers, cutting tools, specialist car tools and mechanics hand tools

- All tools can be conveniently stored within the chest and trolley

- Aluminium drawer pulls with 35mm ball bearing slides and features a sturdy steel side handle on the trolley for easy manoeuvrability

*All items listed are subject to availability. If an item is not available an alternative item or higher piece count will be offered.

- High quality mechanics kit includes heavy duty professional 9 drawer chest & 6 drawer trolley

- Constructed from a heavy duty all steel construction with a tough industrial powder coating

- Aluminium drawer pulls with 35mm ball bearing slides and features a sturdy steel side handle on the trolley for easy manoeuverability

- Comprehensive range of sockets, spanners, wrenches, screwdrivers, pliers, drill bits and cutting tools

- All tools can be conveniently stored within the chest and trolley

*All items listed are subject to availability. If an item is not available an alternative item or higher piece count will be offered.

Includes:

- DEWALT® 18V Brushless Hammer Drill Driver

- DEWALT® 18V Brushless Impact Driver

- DEWALT® 18V XR Brushless 125mm Angle Grinder

- DEWALT® 18V XR Brushless 24mm SDS – Plus Hammer Drill

- DEWALT® 18V 5ah Battery x 3  

- DEWALT® XR Multi-Voltage 4a Charger

- DEWALT® Tough System DS300 Box

- DEWALT® Tough System DS150 Box

- Engine: 13HP

- Max Pressure: 262bar (3800psi)

- Flow Rate: 12L/min (720L/hr)

- Displacement: 389cc

- Speed (no load): 3350-3550r/min

- Weight (dry): 55kg

Caution: Owing to the water pressure produced by this machine, it is unsuitable for use on domestic vehicles.

- High quality mechanics kit includes heavy duty professional 9 drawer chest & 6 drawer trolley Constructed from a heavy duty all steel construction with a tough industrial powder coating

- Aluminium drawer pulls with 35mm ball bearing slides and features a sturdy steel side handle on the trolley for easy manoeuvrability

- Comprehensive range of sockets, spanners, wrenches, screwdrivers, pliers, drill bits and cutting tools

- All tools can be conveniently stored within the chest and trolley

*All items listed are subject to availability. If an item is not available an alternative item or higher piece count will be offered.

Specifications:

- Rated power 1600W

- Run time 4.2 hours @ 75% load

- Output 230V

- Engine 100CC petrol

- Sockets: 2 x 13amp 230V and 1 x 12V

Specifications:

- Output amperage range: 65 - 180A

- Phase: 230V/400V

- Duty Cycle: 20% @ 180A , 100% @ 65A

- Welding Wire Size: 0.8 - 1.2mm

- Wire Spool Capacity: 5 -15 kg

- Max Bar Pressure: 180 bar

- Max Water Flow: 610l/h

- Motor Size: 2900W

- Max Flow Temperature: 60°C

- Cable Length: 5M

- Hose Length: 10M

Output amperage range: 20 - 200A

Input current: 16A

MIG welding wire sizes: 0.6 and 0.8mm

MMA/ARC electrode sizes: 1.5 - 4.0mm

- 30cm never flat wheels

- Easy pull recoil start

- Low oil shut-off sensor

- Durable steel frame

- EU5 Compliant

Includes: 6m high pressure hose, 9m detergent hose, Oil funnel, Trigger gun, Spray wand, 3 quick connect nozzles (0°, 25°, soap), Integrated hose hanger and gun holder

Includes: Draper Storm Force 20V 1/2" Mid-Torque Impact Wrench, Draper Storm Force 20V Oscillating Multi-Tool, Draper Storm Force 20V Cordless Impact Driver, Draper Storm Force 20V Jigsaw, Draper Storm Force 20V Drill Driver, 20V Charger for Stormforce Interchange Range of Batteries, Draper Storm Force® 20V Li-Ion Battery (4.0AH) x 2, Draper Tool Bag on Wheels (600mm)

- High quality heavy duty professional 9 drawer chest

- Constructed from a heavy duty all steel construction with a tough industrial powder coating

- Comprehensive range of sockets, spanners, wrenches, screwdrivers, pliers, drill bits and cutting tools

- All tools can be conveniently stored within the chest and trolley

- Aluminium drawer pulls with 35mm ball bearing slides and features sturdy steel side handles for easy manoeuvrability

*All items listed are subject to availability. If an item is not available an alternative item or higher piece count will be offered.

 Specifications:

- Ultimate torque 1627Nm (1200ft/lb)

- Free speed 5,500 rpm

- Operating air pressure 90psi (6.2bar)

- Average air consumption 6cfm (170L/min)

- Vibration level 10.2m/s2

Specifications:

- Rated power 2500W

- Run time 11 hours @ 75% load

- Sockets 16A - 110 & 230V and 1 x 12V DC

- Fuel tank capacity 15L

 Specifications: 

- Duty Cycle: 60% - 40A

- Cutting Range: 12mm (mild steel)

- Clean Cut: 10mm

- Severance Cut: 12mm

- Air Required: 8.8 cfm

- Max Bar Pressure: 140

- Max Water Flow (l/h): 460

- Motor Size: 2400W

- Voltage: 230V

- Motor Size: Induction

- Max Flow Temperature: 40 °C

- Cable Length: 5m

- Hose Length: 9m

Includes 3 Power Tools, 3 Batteries, 1 Fast Charger & Tool Bag: 

20V Combi Drill, 20V 1/2" Impact Wrench, 20V 115mm Angle Grinder, 20V 2 x 2.0Ah Li-ion Batteries, 20V 4.0Ah Li-ion Battery, 20V Fast Charger, 440mm Tool Bag

 Specification:

- Rated power 2000W

- Run time 4.2 hours @ 75% load

- Output 110/230V and 12V DC

- Sockets 16A - 110 & 230V and 1 x 12V DC

- Fuel tank capacity 3.6L

Specifications:

- Capacity: 90L

- Height: 1610mm

- Powerful 1500W motor

- High sliding fence for better material support and improved accuracy

- Horizontal handle reduces fatigue, providing maximum comfort and control

- Pre-indexed mitre stops for faster, more accurate repeatable cuts

- Replaceable brushes for extended motor life

- Max Bar Pressure: 135 bar

- Max Water Flow (l/h): 440l/h

- Motor Size: 1700W

- Max Flow Temperature: 40°C

- Cable Length: 5M

- Hose Length: 8M

Max Purchase of 2

• Grass Trimmer with Battery and Charger
• Dual-line cutting system
• Switch between trimming and edging mode in just one click
• Plant protector for precise and gentle trimming around plants

Comes with 1 x Dremel 4000, 1 x Carry Case, 6 x Attachments, 128 x Accessories

• - Blow speed: 355kph (220mph)
• - Fuel tank volume: 2.2 litres
• - Cruise control lever, reduces possible strain on your hand over long periods
• - Easily adjust the grip position for comfort
• - Easy to attach tubes for quick assembly and easy storage

- 214 Piece kit

- 1/4", 3/8" & 1/2" drive

- Manufactured and tested generally in accordance with DIN3122 and ISO3315 Specifications

- Brushless motor for superb efficiency

- Ultra-compact and lightweight design

- Two speed metal transmission for better runtime and longer life

- Drill driver and hammer feature for a range of jobs

Includes: Multi-voltage XR charger, 2 x 2.0AH Batteries, Soft storage bag, 18V Brushless Compact Hammer Drill Driver, 

- 150 Piece kit

- 1/4", 3/8" & 1/2" drive

- Manufactured and tested generally in accordance with DIN3122 and ISO3315 Specifications

- Max Bar Pressure: 130 bar

- Operating Pressure: 95 bar

- Max Water Flow (l/h): 460l/h

- Motor Size: 1500w

- Max Flow Temperature: 40°C

- Cable Length: 5m

- Hose Length: 6m

- Working Voltage: 33V - 85V

- Control Voltage: 24V

- Output amperage range: 35 - 200A

- Duty cycle: 20% at 200A

- MIG welding wire sizes: 0.6 and 0.8mm

- Hand operated hydraulic power unit with 4 tonne capacity

- Supplied with hydraulic wedge, assorted plungers and rams in heavy plastic carrying case

- Easy snap together design, for quick operation

- Suitable for lifting, pushing, pulling, bending, straightening and spreading

- Use to return bodywork structures to original shapes

- Vanadium steel construction

- Fully heat treated for strength & durability

- Satin chrome finish

- Quick release

- Soft grip

- Convenient carry case for storage and transportation

- High quality alloy steel

- Heat treated and tempered for strength and durability

- M6 – M24 packed in metal case for safe keeping

- 3 box levels (24", 48", 72") and a torpedo level

- Extruded aluminium body with carry pouch

- 2 x 90° & 1 x 180° Vials

- Sturdy shock proof vials accurate to 0.5mm per meter

- Rubber anti slip end caps with two large soft grip handles

- Fully polished chrome vanadium steel spanners in metric and imperial

- Fully heat treated for strength and durability

- Chrome finish to help prevent corrosion

- Precision machined with 12-point pro drive ring end

- Comes in plastic storage rack for safe keeping

- Constructed from S2 steel

- Hardened magnetic tips

- Ergonomic, soft grip handles

- Hexagon shanks and heads on most sizes

- Supplied in plastic case

- 109 pieces for general purpose use

- Suitable for: Masonry, metal and wood

- Compatible with standard chucks and hex chucks for screw driving

- Comes in an organised carry case